Products

Open Turbine Impellers

YCK/XCK: The axial flow paddles which have convection circulation and onflow diffusivity capacities. It is suitable for mixing, dispersing, crystallization, reaction, dissolving, solid suspending and heat transfer, etc. The betterment type which has stabilizer uses for the occasion where the shaft which is designed critical point need radial support. Type KG works in laminar region to avoid heavy element depositing. It is also suitable for crystallization, extraction and washing, and heat transfer of high viscosity medium.

XK: The axial flow paddles which have convection circulation and onflow diffusivity capacities. It is suitable for mixing, dispersing, crystallization, reaction, dissolving, solid suspending and heat transfer, etc. The betterment type which has stabilizer uses for the occasion where the shaft which is designed critical point need radial support. Type KG works in laminar region to avoid heavy element depositing. It is also suitable for crystallization, extraction and washing, and heat transfer of high viscosity medium.

PK: Radial flow type impeller with high shearing force and onflow diffusivity is used widely in varied speed and viscosity. Without disc, they don't counteract mixing and can become convection circulation. Make it especially for shearing and dispersing, and for dissolving, reaction, heat transfer, emulsification, crystallization and solid suspending.

WK: The types which have back angle paddles have large output flow. Make it especially for solid suspending.

HQ: Types HQ, SQ are axial flow type impellers. They produce strong circulation and good shearing force with finger baffles. They are used in processes of heat transfer, mass transfer, dissolving, suspending.

BM: These radial flow type impellers with good pumping rate, reduced shearing force and lower power consumption. Circulation flow and onflow diffuse can be produced when baffles are set. It is used in processes of heat transfer, mass transfer mixing and fiber dissolving.

Send Inquriy
 
Agitator datasheetDownload
Necessary Information for Agitator Design:
1.1 Mounting type : Top entry/Side entry/Bottom entry
1.2 Location : Indoor/Outdoor
2.1 Vessel diameter(mm)
2.2 Vessel height(mm)
2.3 Shape of vessel heads(top/bottom)
2.4 Operating pressure(barg)
2.5 Operating temperature(℃)
2.6 Fluid density(kg/m3)
2.7 Fluid viscosity(cP)
2.8 Mixing purpose
3.1 Impeller material
3.2 Shaft material
3.3 Mounting flange material
4.1 Explosion Protection
4.2 Variable-frequency Drive : Yes/No